Inconel 600 costs about 25to25to45 per kilogram in 2026 for standard mill forms, or roughly 11.34to11.34to20.41 per pound. The alloy, also sold as alloy 600 and UNS N06600, depends on product form, certification, quantity, and origin for its exact Inconel 600 price per kg, and two quotes for the same drawing can differ by more than 50%.
Consider Lena, a procurement engineer at a Houston fabrication shop. In October 2026, she sent the same 50 mm 600 round bar drawing to three suppliers. One quoted 31/kgFOBShanghai.Anotherquoted31/kgFOBShanghai.Anotherquoted48/kg DDP Houston. The first was black hot-rolled bar with a mill certificate. The second was peeled, straight, tested to EN 10204 3.2 with ultrasonic inspection, and delivered duty paid. Once Lena added the 75% US duty that applies to China-origin Inconel 600 hot-rolled bar under its current tariff classification, the 31quotelandedatabout31quotelandedatabout54/kg.
Every buyer who compares an FOB mill quote with a DDP distributor quote sees a version of this. The difference is rarely the alloy. It is what the quote includes.
This guide gives you the 2026 price bands by form, the published alloy surcharge, the certification cost stack, and the landed-cost math for the US, India, and Europe. You will also get a 10-line RFQ and the per-meter math that turns a $/kg quote into a piece price you can compare.
Key Takeaways
- Standard 2026 mill forms of Inconel 600 trade at 25to25to45/kg, or 11.34to11.34to20.41/lb and 25,000to25,000to45,000 per metric ton.
- Product form moves the number: mill bar 20to20to25/kg, finished plate 35.50to35.50to55/kg, tube 26to26to30/kg, flanges 30to30to45/kg, wire 66to66to99/kg, and powder 132to132to220/kg.
- Special Metals’ November 2026 surcharge for Inconel 600 is 5.46/lb(5.46/lb(12.04/kg), down from 6.04inSeptember,whileLMEnickelsettledat6.04inSeptember,whileLMEnickelsettledat15,945/t on 17 November 2026.
- Certification adds 10% to 30% for EN 10204 3.2 and 30% to 100%+ for AMS; China-origin 600 hot-rolled bar entering the US faces a 75% total effective duty.
- A complete 10-line RFQ with form, size, condition, certification, quantity, and Incoterm cuts quote variance from 40% to 50% down to under 10%.
How Much Does Inconel 600 Cost Per Kg in 2026?

The published asking range for Inconel 600 price per kg is 25to25to45 for standard mill forms. That band comes from supplier price guides published in June 2026, not from an exchange or a mill price list. It is a budgeting number, and it needs a basis before you can compare it.
| Product Form | Published 2026 Range (USD/kg) | USD/lb | Basis and Source |
|---|---|---|---|
| Plate and sheet, mill | 25to25to32 | 11.34to11.34to14.51 | Standard plate, YSH Steel, June 2026 |
| Plate, finished and cut | 35.50to35.50to55 | 16.10to16.10to24.95 | Thickness-dependent, OEPipe, 2026 |
| Round bar, mill | 20to20to25 | 9.07to9.07to11.34 | Black hot-rolled bar, JCOE, June 2026 |
| Round bar, US distributor | 39.68to39.68to52.91 | 18to18to24 | NC Alloys, 2025, converted |
| Tube | 26to26to30 | 11.79to11.79to13.61 | JCOE, June 2026 |
| Butt-weld fittings | 26to26to35 | 11.79to11.79to15.88 | JCOE, June 2026 |
| Forged fittings | 28to28to40 | 12.70to12.70to18.14 | JCOE, June 2026 |
| Flanges | 30to30to45 | 13.61to13.61to20.41 | JCOE, June 2026 |
| Wire | 66.14to66.14to99.21 | 30to30to45 | NC Alloys, 2025, converted |
| Powder | 132.28to132.28to220.46 | 60to60to100 | NC Alloys, 2025, converted |
| Scrap | 15.43to15.43to22.05 | 7to7to10 | InconelScrapPrice.com |
Need a firm number for your specification? Send the form, size, condition, certification, and quantity to our team. We respond to Inconel 600 price requests within 24 hours. Request an Inconel 600 tube quote.
The 25to25to45/kg band is not a single supplier’s offer. JCOE’s June 2026 guide uses it across forms. YSH Steel’s June 2026 guide puts standard plate and sheet at 25to25to32/kg and broader industrial forms up to 45/kg.OEPipe′s2026platetablestartsat45/kg.OE Pipe’s 2026 plate tables tarts at35.50/kg for 12 to 50 mm heavy plate and reach $55/kg for 0.5 to 3.0 mm cold-rolled sheet. Each number is valid for its own basis.
Price per pound and per metric ton
One kilogram is 2.20462 pounds. That puts the Inconel 600 price per pound at 11.34to11.34to20.41 and the price per metric ton at 25,000to25,000to45,000. A US distributor quote of 18to18to24/lb converts to 39.68to39.68to52.91/kg. That is roughly double the China domestic spot range, and the gap is channel and region, not a different alloy.
| Unit | Low End ($25/kg) | High End ($45/kg) |
|---|---|---|
| USD per pound | $11.34 | $20.41 |
| USD per metric ton | $25,000 | $45,000 |
| INR per kg at 93.37 INR/USD | ₹2,334 | ₹4,202 |
| CNY per kg at 6.692 CNY/USD | ¥167 | ¥301 |
Exchange rates are dated 20 November 2026. They move, and so does the converted price.
Why published ranges differ
Five variables explain most of the spread between published numbers.
- Form and finish. Black hot-rolled bar sits at the bottom of the range. Peeled, turned, ground, or polished bar adds processing. Thin cold-rolled sheet sits above heavy plate because rolling yields are lower.
- Certification. A mill certificate is not the same as EN 10204 3.2 witnessed inspection, and neither is the same as an AMS aerospace release.
- Quantity. Tonne lots receive discounts that small cut lengths do not. YSH Steel estimates 15% to 25% for tonne-lot orders.
- Origin and channel. China domestic spot, Indian distributor stock, and US service-center stock are three different markets with different margins.
- Date. A 2024 page, a 2025 page, and a 2026 page are not comparable. Nickel moved, and surcharges reset.
OEPipe’s page illustrates the problem. Its headline says 25.5to25.5to45.8/kg, while its own table says 35.50to35.50to55/kg. The table is more specific. When a page gives no basis, treat the number as a starting point and ask for the form, finish, and certificate behind it.
What Drives the Inconel 600 Price Per Kg?
Inconel 600, or alloy 600, is a nickel-chromium-iron alloy with a minimum of 72.0% nickel plus cobalt, 14.0% to 17.0% chromium, and 6.00% to 10.00% iron, according to the Special Metals SMC-027 bulletin. That composition explains most of the base material cost.
Nickel, chromium and iron: the 72% problem
Nickel is the largest cost driver because it is the largest constituent. LME nickel gained 0.6% to 15,945/ton17November2026,aftera7.215,945/ton17November2026,aftera7.216,315/t on 5 November, according to Kalkine. A 1,000/tmoveinnickelisworthabout1,000/tmoveinnickelisworthabout0.72/kg in 600 at 72% nickel, before melt yield and processing losses.
Chromium and iron matter less per kilogram but still move the number. Special Metals’ October 2026 raw-material averages were 5.90/lbforchromiumand5.90/lbforchromiumand1.30/lb for iron, against $7.02/lb for nickel.
Inconel 600 contains no deliberate molybdenum or niobium in its specification. That is why YSH Steel calls it the most cost-effective grade in the Inconel family. It is also why 600 prices are less exposed than 625 or 718 to molybdenum and niobium spikes. The 600 composition is covered in more detail in our Inconel 600 properties reference.
The alloy surcharge, explained with November 2026 numbers
Many mills quote a base price plus an alloy surcharge. The surcharge tracks the market value of nickel and other alloying elements over a reference period, so it resets when the raw-material averages move.
Special Metals publishes the mechanism and the monthly numbers. For Inconel 600, the ship-month surcharge was 6.04/lbinSeptember2026,6.04/lbinSeptember2026,5.81/lb in October, and 5.46/lbinNovember,accordingtoits[alloysurchargereport](https://www.specialmetals.com/services/prior−month−adjuster.html).At2.20462lb/kg,theNovemberfigureis5.46/lbinNovember,accordingtoits[alloysurchargereport](https://www.specialmetals.com/services/prior−month−adjuster.html).At2.20462lb/kg,theNovemberfigureis12.04/kg.
That surcharge is separate from the base mill price. A 28/kgbaseplusa28/kgbaseplusa12.04/kg surcharge is $40.04/kg before any processing, testing, or freight. The arithmetic is illustrative, but the structure is real, and it explains why a quote can move without the supplier changing its margin.
For comparison, the same November report lists a 9.15/lb(9.15/lb(20.17/kg) surcharge for 625 and 7.25/lb(7.25/lb(15.98/kg) for 718. Those grades carry more molybdenum and niobium, so their surcharge is larger.
Melting, rolling and heat treatment
Raw material is only the first cost layer. Inconel 600 is melted under vacuum, often refined by electroslag remelting, forged or rolled, annealed, pickled, straightened, and tested. Each step consumes energy, labor, and yield.
Zhonggongte’s Wuxi operation runs vacuum induction and electroslag remelting furnaces, 6-ton, 4-ton, and 1-ton forging hammers, hot and cold rolling tube lines, precision strip rolling units, and heat-treatment furnaces. The quality laboratory includes direct-reading spectrometers, tensile and hardness testing, metallographic analysis, and ultrasonic NDT, according to our about page. Those capabilities are part of the cost stack, not a marketing extra.
One cost advantage is metallurgical. Inconel 600 is solid-solution strengthened and is not precipitation-hardenable, according to SMC-027. It does not need the aging cycle that 718 requires. That keeps heat treatment simpler, which is one reason 600 is usually cheaper than 718 in equivalent forms.
Where prices go next in 2026
No one can quote a 2027 price with confidence, but the 2026 range is measurable. LME nickel traded in the mid-16,000sinNovember2026:16,000sinNovember2026:15,945/t on 17 November and a three-month close of 16,315/ton5November,accordingtoKalkine.Theweeklyaverageto14Novemberwas16,315/ton5November,accordingtoKalkine.Theweeklyaverageto14Novemberwas16,230/t, according to BigMint.
The surcharge trend has followed nickel lower. Special Metals’ 600 surcharge fell from 6.04/lbinSeptemberto6.04/lbinSeptemberto5.46/lb in November. If nickel holds in the mid-$16,000s, the base case is a flat to modestly lower surcharge, with processing costs rising 5% to 10% on labor and energy.
A 2,000/tnickelspikewouldaddabout2,000/tnickelspikewouldaddabout1.44/kg at 72% nickel before the surcharge timing catches up. Buyers with annual requirements should ask for a fixed price with a surcharge cap, or an LME-linked formula with a collar. Both are common in 2026 contracts.
Inconel 600 Price by Product Form

Form changes the price because each form consumes a different amount of rolling, drawing, machining, and testing. The same heat of steel can become bar, plate, tube, or wire, and each route has a different yield.
Round bar and rod
Mill round bar is the lowest-cost wrought form. JCOE’s June 2026 guide puts the Inconel 600 round bar price at 20to20to25/kg. NC Alloys’ 2025 retail list puts it at 28to28to40/lb, which converts to 61.73to61.73to88.18/kg. The gap is the difference between a mill order and a US distributor’s cut-to-length stock.
Black hot-rolled bar is the baseline. Peeling, turning, grinding, and straightening add cost. Tight diameter tolerance, straightness, and a specific surface finish add more. A 25 mm bar weighs 4.16 kg/m, so at 20to20to25/kg the material is 83to83to104/m; at the distributor’s 61.73to61.73to88.18/kg, the same bar is 257to257to367/m.
Plate, sheet and strip
Plate and sheet carry a higher price per kilogram than black bar because rolling yields are lower and flatness tolerances are tighter. YSH Steel puts standard 600 plate and sheet at 25to25to32/kg. OEPipe’s 2026 table is more granular: 35.50to35.50to42/kg for 12 to 50 mm heavy plate, 38.50to38.50to48/kg for 3 to 12 mm hot-rolled plate, and 45to45to55/kg for 0.5 to 3.0 mm cold-rolled sheet.
The thickness effect is easy to see in a piece price. A 1,000 x 2,000 x 3 mm plate weighs 50.82 kg at 8.47 g/cm³. At 35.50to35.50to55/kg, the plate costs 1,804to1,804to2,795 before cutting or testing. A 20 mm plate at 1,500 x 6,000 mm weighs 1,524.6 kg, so at 38.50to38.50to48/kg it costs 58,697to58,697to73,181 per plate. The per-kilogram rate looks similar, but the order value is not.
Pipe and tube
Tube prices sit above bar because the forming route is longer. JCOE’s June 2026 guide puts 600 tube at 26to26to30/kg. India’s HT Stainless lists 600 seamless pipe at 44,000 to 44,000 to 45,500/t, or 44 to 44 to 45.50/kg, and ERW pipe at 43,000 to 43,000 to 44,500/t. The difference between the JCOE and HT numbers reflects size, wall thickness, test scope, and market.
A 114.3 mm OD x 6.02 mm wall tube weighs 17.35 kg/m. At 26to26to45/kg, the material is 451to451to781/m. Hydrostatic testing, ultrasonic inspection, and a specific surface finish add cost on top.
Wire, flanges, fittings and forgings
Wire is the most processed wrought form. NC Alloys’ 2025 list puts 600 wire at 30to30to45/lb, or 66.14to66.14to99.21/kg. The premium reflects drawing, annealing, spooling, and the risk of surface defects.
Fittings and flanges sit between bar and wire. JCOE puts butt-weld fittings at 26to26to35/kg, forged fittings at 28to28to40/kg, and flanges at 30to30to45/kg. Forging yield, die wear, machining allowance, and pressure-test requirements explain the spread. Large flanges and complex fittings are sometimes priced per piece rather than per kilogram because the processing time dominates.
Welding wire and filler selection are covered in our Inconel 600 welding guide.
Powder and additive manufacturing
600 powder is a niche product. NC Alloys’ 2025 list puts it at 60to60to100/lb, or 132.28to132.28to220.46/kg. Particle size distribution, sphericity, oxygen content, and lot certification drive the price. Most additive-manufacturing demand in the Inconel family goes to 625 and 718, so 600 powder lots are less common and often carry a small-lot premium.
What Certification Adds to the Inconel 600 Price Per Kg
Certification is the largest non-material cost lever. It changes the testing, documentation, and release process, and it can double the effective price of the same heat.
ASTM and ASME baseline
The baseline specifications by form are ASTM B166 for bar, B167 for pipe and tube, B168 for plate, sheet, and strip, B163 for condenser and heat-exchanger tube, and B564 for forgings. The ASME SB versions are the pressure-vessel equivalents.
A mill certificate to EN 10204 3.1 states the chemistry and mechanical properties from the mill’s own inspection. It is the standard commercial document. It is not third-party witnessed.
AMS 5540, 5665, 5580 and 5687
AMS specifications add aerospace heat treatment, mechanical testing, and traceability. The form matters:
- AMS 5540 covers sheet, strip, and plate.
- AMS 5665 covers bars, forgings, and rings.
- AMS 5580 covers seamless tubing.
- AMS 5687 covers wire.
A common quoting error is to specify AMS 5665 for plate. The correct flat-rolled specification is AMS 5540. Getting this wrong can add cost in one direction or disqualify the material in the other.
YSH Steel estimates that aerospace-grade AMS material with full traceability and mechanical testing can add 30% to 100%+ to the base price. The exact premium depends on the test scope and the lot size.
EN 10204 3.1 vs 3.2, NACE, PMI and UT
EN 10204 3.2 requires independent witnessed inspection at the mill. YSH estimates the adder at 10% to 30% or more. The cost covers the inspector’s time, test scheduling, and the documentation package.
NACE MR0175 / ISO 15156 applies to sour-service equipment. It adds hardness control, test documentation, and sometimes a modified heat treatment. Xurui Metal published a 2026 case in which 625 bar quotes ran 45/kgforcommercial−gradematerialand45/kgforcommercial−gradematerialand78/kg for NACE-compliant bar with full traceability and ultrasonic testing. The buyer chose the higher quote because the application required it.
Positive material identification (PMI) and ultrasonic testing (UT) are separate line items. PMI verifies the alloy chemistry on the finished part. UT looks for internal discontinuities. Neither is included in a basic mill certificate unless the purchase order says so.
Ask for an itemized certificate cost before you compare totals. Our material certificate page explains the documents that ship with a mill order.
Inconel 600 Price Per Kg in China, India, the US and Europe
Origin changes the price through energy, labor, freight, duty, and the depth of the local distributor network. It does not change the alloy.
China factory and domestic spot pricing
China’s domestic spot price for 600 was 180 to 220 RMB/kg in June 2026, tax-inclusive, according to Shanghai Desen’s price list. At 6.692 CNY/USD, that is 26.90to26.90to32.88/kg.
Chinese suppliers add processing and commercial terms on top of the spot price. Shanghai Desen lists cut-to-length at 5 to 10 RMB/kg, a 13% VAT, a discount of 8 to 15 RMB/kg above 3 tonnes, pipe at plus 20 to 30 RMB/kg, heavy plate at plus 10 to 20 RMB/kg, and forgings at plus 30 to 50 RMB/kg. The import premium for Western mill material is 40% to 80%.
A Chinese mill quote can be competitive, but the landed cost depends on freight, duty, and documentation. Our Wuxi operation tests to ASTM, ASME, GB, and JIS standards and provides spectral testing, material certificates, and 24-hour logistics support.
India distributor pricing
India’s retail market for 600 was ₹2,500 to ₹4,500/kg in May 2026, according to Siddhgiri Overseas. At 93.37 INR/USD, that is 26.78to26.78to48.19/kg. HT Stainless lists 600 at ₹2,500/kg, or about $35.98/kg at the page’s 2024 exchange rate.
Indian distributors often quote stock rather than mill tonnage. Confirm whether the material is imported or domestically produced, and whether the certificate meets the project standard. Retail listings frequently omit the form and test scope.
US landed cost and the 75% tariff
The US tariff classification for Inconel 600 hot-rolled bar is HTS 7222.11.00.06. The CBP HTS reference file dated 9 November 2026 shows a 75% total effective rate for China origin, made up of a free MFN rate plus a 75% Chapter 99 surcharge. Mexico, Canada, Germany, and Japan face 50%, according to Wove’s tariff page.
The math is blunt. A 30/kgFOBChinabarbecomes30/kgFOBChinabarbecomes52.50/kg before freight, insurance, and customs brokerage. At 500 kg, that is 26,250beforelogistics.AUSdistributorat26,250beforelogistics.AUSdistributorat39.68 to $52.91/kg may be competitive once the landed cost is complete.
Tariff rules change, and the classification depends on the product form and dimensions. Verify the HTS code and country of origin with a customs broker before you award a purchase order. Do not assume that a lower FOB price is a lower landed price.
Europe and the certified-mill premium
European mills price higher than Chinese mills because of labor, energy, and regulatory costs. Lead times are also longer for non-stock items. The premium is justified when the project specification names a European mill, when the end user requires a specific EN 10204 3.2 inspection regime, or when logistics favor local supply.
For general industrial, chemical, and heat-treating applications, a certified Chinese supplier can meet the same ASTM or ASME specification at a lower landed cost. The key is to verify the certificate, the test scope, and the heat number.
Inconel 600 Scrap Price and Surplus Material
Scrap is a separate market. The Inconel 600 scrap price is set on recovery value, not on the cost of a certified mill product.
What Inconel 600 scrap is worth
Inconel 600 scrap was 7.00to7.00to10.00/lb in 2026, or 15.43to15.43to22.05/kg, according to InconelScrapPrice.com. NC Alloys’ 2025 list quotes 5to5to8/lb, or 11.02to11.02to17.64/kg. The range depends on grade, cleanliness, form, and quantity.
Scrap is sold to foundries and recyclers. It is not a mill product, and it does not carry a mill certificate.
Why scrap is not a substitute for certified plate
Consider a maintenance planner in Ohio who finds 600 scrap at 8/l band and asks why certified plate is 8/l band and why certified plate is 40/kg. The answer is traceability. The pressure-vessel repair requires a known heat number, chemistry, mechanical properties, and ultrasonic testing. The scrap has none of those. The “saving” disappears when the repair has to be re-specified with certified plate.
Scrap can work for non-critical, non-pressure applications where the chemistry can be verified by PMI and the heat history does not matter. It cannot substitute for a certified mill product in pressure, aerospace, nuclear, or sour-service equipment.
How to Request an Accurate Inconel 600 Price Quote

An incomplete RFQ produces an unusable quote. Suppliers can only price what is specified, and the missing details are the reason quotes vary.
The ten-line RFQ
Include these ten items in every request:
- Alloy designation: Inconel 600, UNS N06600, or W. Nr. 2.4816.
- Standard: ASTM B166, B167, B168, B163, B564, AMS 5540, AMS 5665, AMS 5580, or AMS 5687.
- Product form: bar, rod, plate, sheet, strip, pipe, tube, wire, forging, flange, or fitting.
- Size and tolerance: diameter, thickness, width, length, wall thickness, and tolerance class.
- Length or dimensions: random, fixed, cut-to-length, or drawing-based.
- Surface finish: black, peeled, turned, ground, pickled, polished, or descaled.
- Quantity: weight or piece count, plus annual volume if this is a trial order.
- Certification: mill certificate, EN 10204 3.1 or 3.2, AMS, NACE, PMI, or UT.
- Delivery terms: Incoterm, destination port, and required delivery date.
- End use: operating temperature, medium, pressure, and whether the part is safety-critical.
How to compare an itemized quote
Ask for the quote to separate base material, alloy surcharge, heat treatment, testing, certification, and freight. That makes it possible to compare suppliers on the same basis and to see which line is driving the difference.
A quote that is 20% below the market range is a warning, not a bargain. Common causes include substituted grade, missing certification, used or surplus material sold as new, and exclusions for freight, duty, or inspection. Verify the heat number and the mill certificate before you accept delivery.
YSH Steel’s published 2026 case makes the point. Maria, a maintenance manager at a Gulf Coast refinery, needed 625 plate for three heat-exchanger repairs. Her first quotes were 54/kg for three separate 150 kg orders. She combined them into one 600 kg order and negotiated a single delivery. The supplier cut the price to 54/kg for three separate 150 kg orders. She combined them into one 600 kg order and negotiated a single delivery. The supplier cut the price to 44/kg, saving about $6,000 on the same material. Consolidation is one of the fastest ways to reduce a per-kilogram price.
Per-meter math for tube and bar
A per-kilogram quote is not a piece price. Use the density of 8.47 g/cm³ and the cross-section to convert.
For a round bar: weight per meter (kg/m) = 0.006652 x diameter² (mm) for Inconel 600. A 25 mm bar weighs 4.16 kg/m.
For a tube: weight per meter (kg/m) = 0.02466 x wall thickness (mm) x (outside diameter (mm) – wall thickness (mm)). A 114.3 mm OD x 6.02 mm wall tube weighs 17.35 kg/m.
For a plate: weight (kg) = length (m) x width (m) x thickness (mm) x 7.85 for carbon steel, or x 8.47 for 600. A 1,000 x 2,000 x 3 mm plate weighs 50.82 kg.
Send us the drawing and the quantity. We will return a per-piece price, the per-kilogram basis, and the certificate scope so you can compare it with every other quote. Request an Inconel 600 quote.
Frequently Asked Questions
Why is Inconel 600 so expensive?
Inconel 600 contains at least 72% nickel, plus chromium and iron. Nickel is the largest cost driver, and the alloy is melted under vacuum, rolled or forged, annealed, and tested. The combination of expensive raw material and processing makes it several times more expensive than 304 or 316 stainless steel.
What is the cheapest form of Inconel 600?
Black hot-rolled round bar in mill quantities is usually the lowest-cost wrought form, at about 20to20to25/kg in 2026. Plate and sheet are next. Wire, powder, and complex forgings sit at the top of the range.
How much is Inconel 600 per pound?
The 25to25to45/kg band converts to 11.34to11.34to20.41/lb. US distributor stock can run 18to18to24/lb, or 39.68to39.68to52.91/kg, because it includes service-center margin, cut lengths, and domestic availability.
Is Inconel 600 cheaper than 625 or 718?
Usually, yes. Inconel 600 has no deliberate molybdenum or niobium, so it is less exposed to those raw-material markets. YSH Steel puts 600 plate at 25to25to32/kg, 625 at 28to28to58/kg, and 718 at 44 to 44 to 55/kg for standard industrial forms. The ranking can change with condition, certification, and form, and our Inconel 600 vs 625 comparison covers the trade-offs in more detail.
Does Chinese alloy 600 meet ASTM and AMS?
Yes, if the mill has the correct melt practice, heat treatment, testing, and documentation. Chinese mills produce UNS N06600 to ASTM B166, B167, and B168, and to AMS 5540, 5665, 5580, and 5687 when specified. Verify the mill certificate and arrange third-party inspection for critical applications.
How often do Inconel 600 prices change?
The alloy surcharge can reset monthly, and mill quotes are often valid for 24 to 72 hours in a volatile nickel market. Ask whether the price is fixed or subject to raw-material adjustment, and request a validity period in writing.
Conclusion
Inconel 600 price per kg, or the alloy 600 price per kg, is not a single number. In 2026, standard mill forms trade at 25to25to45/kg, or 11.34to11.34to20.41/lb, with finished plate, certified material, and complex forms above that. Nickel, the alloy surcharge, certification, quantity, and origin explain most of the difference between two quotes.
The fastest way to control cost is to specify the form, size, condition, certification, quantity, and Incoterm before you ask for a price. A complete RFQ turns a 40% to 50% spread into a comparable number. Then compare landed cost, not just the per-kilogram rate.
Zhonggongte supplies Inconel 600 bar, plate, tube, and related forms from Wuxi, with spectral testing, material certificates, and ultrasonic NDT. Send your specifications and we will return pricing, availability, and the certificate scope within 24 hours.




